Description
The Command window displays input commands
and corresponding output,
where every input command is preceded by the
O>
prompt.
Example
If you enter
cos(pi)
at the O> prompt,
O-Matrix will respond
-1
in the Command window as follows:
Note that input lines in the Command window are preceded by
the O> prompt.
Saving Input Commands
The commands you have typed can be saved to an ASCII text file
for later use.
To do this, select File | Save As from the menu,
chose the Save Commands radio button,
select the Select File Name button, and
then choose a file name.
Saving Command Window
The current contents of the command window can also be saved to a file.
To do this, select File | Save As from the menu,
chose the Save Output radio button, and
select the Select File Name button, and the
choose a file name.
Text printed in this window can also be saved using the
diary
command.
